Hydrocarbon Dew-Point Analyzer – Condumax II

Condumax II is a fully self-contained hydrocarbon dew point analyzer, using the proven “Dark Spot” hydrocarbon dew point measurement principle from the highly successful Condumax instrument. Combining a hydrocarbon dew point cell and water dew point measurement in the same compact and lightweight EExd enclosure, Condumax II requires nothing more than mains power to operate.

• Fully automatic on-line analysis
• Objective, highly repeatable
• 0.5°C hydrocarbon dew-point accuracy
• Fundamental chilled mirror principle
• Patented detection technique
• Self-cleaning
• No purge or cooling gas needed
• Optional water dew-point analysis
• Modbus RTU
• IECEx, ATEX, _CCSA_US and GOST Ex certifications

• Hydrocarbon Dew-Point Measurement
  Measuring Technique	Dark SpotTM fixed sample analysis. Direct photo-detection of hydrocarbon condensate at hydrocarbon dew-point temperature
  Sensor Cooling	Automatic via 3-stage Peltier effect electronic cooler under adaptive control
  Maximum Range	Up to Δ -55K measurement depression from Main Unit operating temperature
  Accuracy	±0.5°C hydrocarbon dew point (single and multiple condensible component analysis)
  Sample Flow	0.03m³/hr (0.5 Nl/min) – alarm standard
  Measurement Frequency	6 cycles/hour (recommended) 12 cycles/hour (maximum)
  Operating Pressure	Max 100 barg (1450 psig)
  Water Dew-Point Measurement (Optional)
  Measuring Technique	Michell Ceramic Moisture Sensor
  Units – Moisture content	°C and °F water dew point; lb/MMscf; mg/m3, ppmV
  Resolution	0.1°C, 0.1°F
  Range	Calibrated from -100 to +20°C dew point
  Accuracy	±1°C from -59 to +20°C dew point ±2°C from -100 to -60°C dew point
  Sample Flow	0.06 to 0.3 m3/hr (1 to 5 Nl/min) alarm standard
  Temperature Coefficient	Algorithm compensation (-20 to +50°C)
  Operating Pressure	Max 138 barg (2000 psig)
  Pressure Measurement Hydrocarbon Dew-Point Analysis Pressure Optional Water Dew-Point Process Pressure
  Units	MPa, barg, psig
  Resolution	0.1 MPa and barg, 1 psig
  Range	HC dew point: 0 to 100 barg W dew point:  0 to 200 barg
  Accuracy	±0.25% FS
  Hydrocarbon Dew-Point Analyzer
  Resolution	Hydrocarbon and water dew point: 0.1°C (0.18°F)
  Sample Gas Supply	Natural gas up to 100 barg (1450 psig), pressure regulated in sampling system
  Enclosure	EExd cast enclosure with removable glass window viewing port. Internally heated for condensation protection
  Sample Gas Connections	1/8” NPT (ATEX / IECEx) or 1/4” NPT (CSA) female ports for both hydrocarbon and water dew-point channels; Sampling system: 6mm OD or 1/4” OD
  Operating Environment	Indoors/Outdoors -20 to +50°C (-4 to +122°F); Max 95% RH
  Power Supply	90 to 260 V AC, 50/60 Hz, 125 W Main Unit 300 W c/w Sampling System (indoor) 400 W c/w Sampling system (outdoor)
  Weight	Main Unit 22.5kg (49.6lbs) ~60kg (132.3lbs) c/w Sampling system (indoor) ~75kg (165.3lbs) c/w Sampling system (outdoor)
  Integrated Display/Keyboard	Touch screen with vacuum fluorescent display
  Outputs	Modbus RTU, RS485 @ 9600 baud rate Two 4-20 mA linear (non-isolated) outputs, user-configurable for any combination of dew-point or pressure parameters
  Alarms	Process and analyzer status via software register and display annotation Integrated low flow alarms for each sample flow Analyzer status fault flag 23 mA on mA Output 1
  Certification
  Hazardous Area Certification	ATEX: II 2G Ex d IIB + H2 Gb IECEx: Ex d IIB + H2 Gb Tamb -40°C to +45°C T4 Tamb -40°C to +60°C T3 cCSAus: Class I, Division 1, Group B, C, & D T4 *TC TR: 1Ex d IIB+H2 T4, T3 Gb
  Pattern Approval	GOST-R, GOST-K, GOST-T

Download Brochure