Product Description
The Rotronic industrial probe is especially suitable for high temperatures up to 200 °C and demanding industrial environments. It measures humidity and temperature and is compatible with the HF5, HF8 series measurement transmitters, HP32 and HP23 handheld devices and the HL-NT dataloggers.
Product Features
Advantages of the industrial probe
- Measures relative humidity and temperature
- Wide temperature measurement range -100…200 °C
- Outstanding accuracy
- repeatability and long-term stability
- Advanced probe housing and construction
- Hot swappable, no calibration adjustment required due to the digital interface with Rotronic devices
Applications of the probe
- Industrial Manufacturing
- Drying processes
- Climate chambers
- Brick industry
Smart Electronics
-
- Based on the Rotronic’s AirChip3000
- Calculates the dew / frost point
- Alarm generation
- Saves adjustment data so that probes can be
interchanged without re-adjusting
- Can be cable mount up to 5 m
- Hot-swappable
Flexibility and Compatibility of the industrial probe
-
- User scalable analog ouput signals (2x 0…1V)
- Digital interface via UART
- Rapidly interfaced with HygroClip2 compatible devices from Rotronic or for OEM applications
Technical Specification
| ACCURACY AT 23 ±5 °C | ±0.8 %rh / ±0.1 K |
|---|---|
| ACCURACY W. ADJUSTMENT PROFILE “STANDARD” | at 23 °C / 10, 35, 80 %rh ± 0.8 %rh / ± 0.1 K |
| PROBE TYPE | Industrial probe |
| OPERATING RANGE | -100…200 °C / 0…100 %rh |
| MEASURING RANGE | -100…200 °C (short-term peak load) / 0…100 %rh |
| POWER SUPPLY | 3.3…5 VDC |
| LONG-TERM STABILITY | <1 %rh / year |
| HUMIDITY SENSOR | Hygromer HT-1 |
| TEMPERATURE SENSOR | PT100 1/3 DIN Class B |
| PROBE PROTECTION | Filter carrier, brass nickel plated |
| FILTER CARTRIDGE | depending on the application, order separately |
| RESPONSE TIME T 63 | <15 sec. |
| ALLOWED WIND SPEED | 3.5 m/s, without filter |
| PSYCHROMETRIC CALCULATIONS | Dew or frost point |
| PROBE ADJUSTMENT BY SOFTWARE | 1 Point & multipoint %rh & °C |
| SOFTWARE UPDATE | With internet and HW4 software |
| USER INFORMATION | from Software HW4 (devicemanager) |
| ANALOGUE OUTPUTS SCALEABLE BY THE USER | Yes |
| ANALOG OUTPUT SIGNAL (STANDARD) | 0…1 V = 0…100 %rh; 0…1 V = -40…60 °C |
| DIGITAL OUTPUT SIGNAL (STANDARD) | UART |
| TYPE OF OUTPUT SIGNALS | 2 x 0…1 VDC |
| MAX. CABLE LENGTH | Up to 5 m with passive cable. Up to 100 m with active cable. |
| PROBE MATERIAL | PPS |
| REVERSE VOLTAGE PROTECTION | Mechanically in the connector |
| SERVICE INTERFACE | UART |
| FDA/GAMP COMPATIBILITY | FDA 21 CFR Part 11 and GAMP compatible |
| DIMENSIONS | Ø15 x 100 mm / Ø15 x 250 mm / Ø15 x 400 mm / Ø15 x 550 mm / Ø15 x 700 mm |
Any Question at
+92 51 4862395
Office # 06, Rose-1 Plaza
I-8 Markaz, Islamabad
Mon-Sat
9 am – 5 pm
Send your mail at
info@tetracon.com.pk