Product Description
The MDM50 Hygrometer has been designed to make high-speed spot checks of the dew point in air and gases to -50°C (–58°F) dew point as simple as possible. This completely self-contained instrument weighs only 4kg and is delivered ready to use. Simply connect your sample gas to the Quick Connect fittings, turn on the instrument, and it will automatically begin to measure the dew point of the applied sample.
Product Features
- Rapid spot-check measurements to –50°Cdp (–58°F)
- T95 to –35°C (–31°F) dew point in <10 minutes
- Simple operation
- Integral sampling system
- Industrial case
- ±2°Cdp (3.6°Fdp) accuracy
- 9-point traceable calibration
- 16 hours of operation between charges
Technical Specification
Performance | |
Measurement Technology | Polymer Capacitive |
Measurement Range | –50 to +20°Cdp (–58 to +68°Fdp) |
Accuracy | ±2°Cdp (±3.6°Fdp) |
Run time | 12-16 hours |
Charge time | 16 hours for maximum charge |
Electrical Input/Output | |
Output | 4–20 mA current maximum load resistance 400 Ω |
Power Supply | Rechargeable NiMH battery pack, charger included |
Operating conditions | |
Operating Temperature | -20 to +50°C (–4 to +122°F) |
Storage Temperature | -40 to +75°C (–40 to +167°F) |
Operating Pressure | Low pressure version: Up to 2 MPa (20 barg / 290 psig) High pressure version: Up to 30 MPa (300 barg / 4350 psig) |
Mechanical Specifications | |
Display | Flush mounted 3.5 digit red LED |
Case | Yellow propylene with charger, sample tubing and output connector stored in the lid |
Weight | 4kg (8.8lbs) total weight |
Enclosure Rating | Case closed: NEMA Type 6 |
Sample Connections | Optional: Legris pneumatic fittings 6mm Swagelok® tube fittings 1/4” Swagelok® tube fittings |
Sample Block | Stainless steel, fully self-contained sample system with fixed orifice ports for flow control/pressure or atmospheric measurement and built-in filtration using a standard drop-in cartridge |
Filter Cartridge | Removes 99.5% of particles ≥0.3μm supplied with cartridge installed. Spare cartridges are available (part no: SSF-PF-10PK) |
Sample tubing | Low pressure version: 2m (6.6′) of 6mm (0.2″) O/D PTFE supplied High pressure version: Metering valve and port adaptor |
Any Question at
+92 51 4862395
Office # 06, Rose-1 Plaza
I-8 Markaz, Islamabad
Mon-Sat
9 am – 5 pm
Send your mail at
info@tetracon.com.pk