Oxygen and COe Analyzer

The Oil price is skyrocketing which forces everyone into lowering energy. The combustion efficiency ratio is a function of the oxygen level. The in situ and continuous measurement of the oxygen level proposed by RB Technologies is the starting point to reduce its energy bill. Indeed, the oxygen value will be plugged into a control system which will guarantee to maintain the combustion in the optimum operating window.

From an environment standpoint, the legal requirements are getting more and more stringent. The good news is that the best operating window is best both from an economical and environmental standpoint. You can kill two birds with one stone. Any lack of air in the combustion will trigger unburned which will have an impact on the environment. Combustion optimization is working on the root cause of emissions.

CHARACTERISTICS :

1. In situ O +CO measurement

-Measurement of first ppm of CO before reaching the exponential trend (that we couldn’t monitor and control)
-Triggers a signal for closed-loop control

2. in Situ :

– Direct in stream measurement with a very high safety level (3 certified flame arrestors)
– Measures net excess oxygen in flue gas up to 1300°C
– High accuracy zirconium oxyde cell

3. ZR Transmitter Hazardous area control unit:

Universal « user-friendly » control unit,

-Compatibility with existing zirconia probes
-System operating instructions prompted by display
-Automatic calibration/blow down function

4. ATEX Certification

Explosion proof
– CE 00 81 Zone 1 II GD
– Ex dII CT6/T5/T3

5. O+unburned measured out of the same cell

-Easy to handle

6. Standard Dimensions

-Same design as O probe and analyzer

Download Brochure / Datasheet